Skip to content

Latest commit

 

History

History
41 lines (32 loc) · 3.88 KB

VERSIONS.md

File metadata and controls

41 lines (32 loc) · 3.88 KB

STEPFOC versions

Which firmware your STEPFOC runs, and which release, bootloader and manual go with it.

Releases

Release Date What it is Bootloader Files
V110 2026-11-13 gripper moves end cleanly and start softly; positions 0 and 255 clear the stops; the gripper keeps its own current limit; CAN parameters 90-93; #Estop over UART; brake or coast saved; no watchdog hold while idle required download
V109 2026-11-10 parameters by number, captures, the watchdog's actions, sound, the encoder table and anti-cogging measured on the driver; the alignment lock fits small motors; the current-sense zero waits for the supply required download
V108 2026-08-26 fixes #Cal failing with Phase order is wrong! on healthy motors required download
V107 2026-08-24 fixes the KD term of PD mode over CAN; brake or coast over CAN required download
V106 2026-07-05 no dropped CAN bursts, a watchdog, a CRC-checked configuration required download
V105 2026-07-04 the first for the bootloader; reversed phase wiring calibrates required download
V103 2025-12-28 the first stable public release, the last from main none tag
V102 2025-12-28 the first official public release none tag
V101 2025-09-29 the first release, based on the Spectral Micro firmware none tag

Releases from V105 on are built from the bootloader-version branch and carry the image stepfoc-firmware-V<number>.bin with its firmware.json; the release notes are the changelog.

The manual has a version for 110 (latest), one for 109, one for 108 and one for 103; 105 to 107 have none of their own. The selector in the manual's header switches between them.

Which version do I have?

What differs How to tell
Firmware 105 or newer has the bootloader: updates over UART or CAN, with Motor GUI #Info prints Software version: <number>; Motor GUI shows it in the driver's identity
Firmware 103 or older no bootloader: install it once with a programming adapter #Info too, but before 105 the number comes from the last #Default: 101 and 102 write 101, 103 writes 103
A driver that reports 103 some were shipped with the bootloader before 105, most likely with 103 built for it with the bootloader the LED blinks for about two seconds at power-up before the firmware starts (more)
Board revision v1, the only revision so far #Info prints Hardware version

What works together

The bootloader, the Python library, the PAR6 runtime, the board revision and the matching Spectral Micro release for each firmware release: Versions and compatibility in the manual.