arm64: dts: rockchip: update pinctrl for px30

1 move pinctrl into board level dts file.
2 remove pinctrl for sleep state.
in sleep state we do not change pin control and keep the pin control
in otp state, which is used by atf as a flag to control pmic's state.

Change-Id: Ib68b20d4f4ba79d99255f1deb509ff8a741deef2
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>

Author: Rocky Hao

arch/arm64/boot/dts/rockchip/px30-evb-ddr3-lvds-v10.dts

@@ -577,6 +577,9 @@
 };
 
 &tsadc {
+	pinctrl-names = "init", "default";
+	pinctrl-0 = <&tsadc_otp_gpio>;
+	pinctrl-1 = <&tsadc_otp_out>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/px30-evb-ddr3-v10.dts

@@ -807,6 +807,9 @@
 };
 
 &tsadc {
+	pinctrl-names = "init", "default";
+	pinctrl-0 = <&tsadc_otp_gpio>;
+	pinctrl-1 = <&tsadc_otp_out>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/px30-evb-ddr4-v10.dts

@@ -730,6 +730,9 @@
 };
 
 &tsadc {
+	pinctrl-names = "init", "default";
+	pinctrl-0 = <&tsadc_otp_gpio>;
+	pinctrl-1 = <&tsadc_otp_out>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/px30.dtsi

@@ -854,10 +854,6 @@
 		assigned-clock-rates = <50000>;
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
-		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&tsadc_otp_gpio>;
-		pinctrl-1 = <&tsadc_otp_out>;
-		pinctrl-2 = <&tsadc_otp_gpio>;
 		#thermal-sensor-cells = <1>;
 		rockchip,hw-tshut-temp = <100000>;
 		status = "disabled";

arch/arm64/boot/dts/rockchip/rk3326-863-lp3-v10.dts

@@ -719,6 +719,9 @@
 };
 
 &tsadc {
+	pinctrl-names = "init", "default";
+	pinctrl-0 = <&tsadc_otp_gpio>;
+	pinctrl-1 = <&tsadc_otp_out>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3326-evb-ai-va-v10.dts

@@ -1140,6 +1140,9 @@
 };
 
 &tsadc {
+	pinctrl-names = "init", "default";
+	pinctrl-0 = <&tsadc_otp_gpio>;
+	pinctrl-1 = <&tsadc_otp_out>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3326-evb-linux-lp3-v10.dts

@@ -837,6 +837,9 @@
 };
 
 &tsadc {
+	pinctrl-names = "init", "default";
+	pinctrl-0 = <&tsadc_otp_gpio>;
+	pinctrl-1 = <&tsadc_otp_out>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3326-evb-lp3-v10.dts

@@ -837,6 +837,9 @@
 };
 
 &tsadc {
+	pinctrl-names = "init", "default";
+	pinctrl-0 = <&tsadc_otp_gpio>;
+	pinctrl-1 = <&tsadc_otp_out>;
 	status = "okay";
 };