MINIARM: set npll be used for hdmi only

Change-Id: I8bebfb2cfb68e3dad172e5547d3886526ad5e912
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>

Author: yueshu

arch/arm/boot/dts/rk3288.dtsi

@@ -990,7 +990,7 @@
                                   <&cru PCLK_PERI>;
 		assigned-clock-rates = <594000000>,
 				       <500000000>, <300000000>,
-				       <150000000>, <75000000>,
+				       <0>, <75000000>,
 				       <300000000>, <150000000>,
 				       <75000000>;
 	};
@@ -1212,6 +1212,8 @@
 		resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vopb_mmu>;
+		assigned-clocks = <&cru DCLK_VOP0>;
+		assigned-clock-parents = <&cru PLL_NPLL>;
 		status = "disabled";
 
 		vopb_out: port {

drivers/clk/rockchip/clk-rk3288.c

@@ -211,9 +211,9 @@ static struct rockchip_pll_clock rk3288_pll_clks[] __initdata = {
 	[cpll] = PLL(pll_rk3066, PLL_CPLL, "cpll", mux_pll_p, 0, RK3288_PLL_CON(8),
 		     RK3288_MODE_CON, 8, 7, 0, rk3288_pll_rates),
 	[gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0, RK3288_PLL_CON(12),
-		     RK3288_MODE_CON, 12, 8, ROCKCHIP_PLL_SYNC_RATE, rk3288_pll_rates),
+		     RK3288_MODE_CON, 12, 8, 0, rk3288_pll_rates),
 	[npll] = PLL(pll_rk3066, PLL_NPLL, "npll",  mux_pll_p, 0, RK3288_PLL_CON(16),
-		     RK3288_MODE_CON, 14, 9, ROCKCHIP_PLL_SYNC_RATE, rk3288_pll_rates),
+		     RK3288_MODE_CON, 14, 9, 0, rk3288_pll_rates),
 };
 
 static struct clk_div_table div_hclk_cpu_t[] = {
@@ -428,7 +428,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 			RK3288_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
 			RK3288_CLKGATE_CON(3), 4, GFLAGS),
 
-	COMPOSITE(DCLK_VOP0, "dclk_vop0", mux_pll_src_cpll_gpll_npll_p, 0,
+	COMPOSITE(DCLK_VOP0, "dclk_vop0", mux_pll_src_cpll_gpll_npll_p, CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
 			RK3288_CLKSEL_CON(27), 0, 2, MFLAGS, 8, 8, DFLAGS,
 			RK3288_CLKGATE_CON(3), 1, GFLAGS),
 	COMPOSITE(DCLK_VOP1, "dclk_vop1", mux_pll_src_cpll_gpll_npll_p, 0,