Standardize CPU temp and voltage. Add autogen warning

tannewt · tannewt · commit 8104b824e0b3 · 2023-04-28T16:19:43.000-07:00
diff --git a/ports/broadcom/common-hal/microcontroller/Processor.c b/ports/broadcom/common-hal/microcontroller/Processor.c
@@ -34,7 +34,7 @@ float common_hal_mcu_processor_get_temperature(void) {
 }
 
 float common_hal_mcu_processor_get_voltage(void) {
-    return 1.2f;
+    return NAN;
 }
 
 uint32_t common_hal_mcu_processor_get_frequency(void) {
diff --git a/ports/espressif/common-hal/microcontroller/Processor.c b/ports/espressif/common-hal/microcontroller/Processor.c
@@ -47,7 +47,7 @@
 float common_hal_mcu_processor_get_temperature(void) {
     float tsens_out;
     #if defined(CONFIG_IDF_TARGET_ESP32)
-    mp_raise_NotImplementedError(NULL);
+    return NAN;
     #else
     temp_sensor_config_t temp_sensor = TSENS_CONFIG_DEFAULT(); // DEFAULT: range:-10℃ ~  80℃, error < 1℃.
     temp_sensor_set_config(temp_sensor);
diff --git a/ports/mimxrt10xx/common-hal/microcontroller/Processor.c b/ports/mimxrt10xx/common-hal/microcontroller/Processor.c
@@ -54,7 +54,7 @@ float common_hal_mcu_processor_get_temperature(void) {
 
     return temp;
     #else
-    return 0;
+    return NAN;
     #endif
 }
 
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/periph.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/periph.c
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1011` to update this file.
+ */
+
 #include "py/obj.h"
 #include "py/mphal.h"
 #include "mimxrt10xx/periph.h"
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/periph.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/periph.h
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1011` to update this file.
+ */
+
 #pragma once
 extern LPI2C_Type *const mcu_i2c_banks[2];
 extern const mcu_periph_obj_t mcu_i2c_sda_list[8];
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/pins.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/pins.c
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1011` to update this file.
+ */
+
 #include "py/obj.h"
 #include "py/mphal.h"
 #include "mimxrt10xx/pins.h"
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/pins.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/pins.h
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1011` to update this file.
+ */
+
 #pragma once
 
 #define FORMAT_PIN(pin_name) extern const mcu_pin_obj_t pin_##pin_name;
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1015/periph.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1015/periph.c
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1015` to update this file.
+ */
+
 #include "py/obj.h"
 #include "py/mphal.h"
 #include "mimxrt10xx/periph.h"
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1015/periph.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1015/periph.h
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1015` to update this file.
+ */
+
 #pragma once
 extern LPI2C_Type *const mcu_i2c_banks[2];
 extern const mcu_periph_obj_t mcu_i2c_sda_list[2];
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1015/pins.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1015/pins.c
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1015` to update this file.
+ */
+
 #include "py/obj.h"
 #include "py/mphal.h"
 #include "mimxrt10xx/pins.h"
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1015/pins.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1015/pins.h
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1015` to update this file.
+ */
+
 #pragma once
 
 #define FORMAT_PIN(pin_name) extern const mcu_pin_obj_t pin_##pin_name;
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/periph.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/periph.c
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1021` to update this file.
+ */
+
 #include "py/obj.h"
 #include "py/mphal.h"
 #include "mimxrt10xx/periph.h"
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/periph.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/periph.h
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1021` to update this file.
+ */
+
 #pragma once
 extern LPI2C_Type *const mcu_i2c_banks[4];
 extern const mcu_periph_obj_t mcu_i2c_sda_list[8];
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/pins.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/pins.c
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1021` to update this file.
+ */
+
 #include "py/obj.h"
 #include "py/mphal.h"
 #include "mimxrt10xx/pins.h"
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/pins.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/pins.h
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1021` to update this file.
+ */
+
 #pragma once
 
 #define FORMAT_PIN(pin_name) extern const mcu_pin_obj_t pin_##pin_name;
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1042/periph.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1042/periph.c
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1042` to update this file.
+ */
+
 #include "py/obj.h"
 #include "py/mphal.h"
 #include "mimxrt10xx/periph.h"
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1042/periph.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1042/periph.h
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1042` to update this file.
+ */
+
 #pragma once
 extern LPI2C_Type *const mcu_i2c_banks[4];
 extern const mcu_periph_obj_t mcu_i2c_sda_list[9];
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1042/pins.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1042/pins.c
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1042` to update this file.
+ */
+
 #include "py/obj.h"
 #include "py/mphal.h"
 #include "mimxrt10xx/pins.h"
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1042/pins.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1042/pins.h
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1042` to update this file.
+ */
+
 #pragma once
 
 #define FORMAT_PIN(pin_name) extern const mcu_pin_obj_t pin_##pin_name;
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1052/periph.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1052/periph.c
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1052` to update this file.
+ */
+
 #include "py/obj.h"
 #include "py/mphal.h"
 #include "mimxrt10xx/periph.h"
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1052/periph.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1052/periph.h
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1052` to update this file.
+ */
+
 #pragma once
 extern LPI2C_Type *const mcu_i2c_banks[4];
 extern const mcu_periph_obj_t mcu_i2c_sda_list[9];
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1052/pins.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1052/pins.c
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1052` to update this file.
+ */
+
 #include "py/obj.h"
 #include "py/mphal.h"
 #include "mimxrt10xx/pins.h"
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1052/pins.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1052/pins.h
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1052` to update this file.
+ */
+
 #pragma once
 
 #define FORMAT_PIN(pin_name) extern const mcu_pin_obj_t pin_##pin_name;
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/periph.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/periph.c
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1062` to update this file.
+ */
+
 #include "py/obj.h"
 #include "py/mphal.h"
 #include "mimxrt10xx/periph.h"
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/periph.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/periph.h
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1062` to update this file.
+ */
+
 #pragma once
 extern LPI2C_Type *const mcu_i2c_banks[4];
 extern const mcu_periph_obj_t mcu_i2c_sda_list[9];
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/pins.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/pins.c
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1062` to update this file.
+ */
+
 #include "py/obj.h"
 #include "py/mphal.h"
 #include "mimxrt10xx/pins.h"
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/pins.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/pins.h
@@ -26,6 +26,14 @@
  * THE SOFTWARE.
  */
 
+/*
+ * This file is autogenerated! Do NOT hand edit it. Instead, edit tools/gen_peripherals_data.py and
+ * then rerun the script. You'll need to 1) clone https://github.com/nxp-mcuxpresso/mcux-soc-svd/
+ * and 2) download and extract config tools data from https://mcuxpresso.nxp.com/en/select_config_tools_data.
+ *
+ * Run `python tools/gen_peripherals_data.py <svd dir> <config dir> MIMXRT1062` to update this file.
+ */
+
 #pragma once
 
 #define FORMAT_PIN(pin_name) extern const mcu_pin_obj_t pin_##pin_name;
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1176/periph.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1176/periph.c
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1176/periph.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1176/periph.h
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1176/pins.c b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1176/pins.c
diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1176/pins.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1176/pins.h
diff --git a/ports/mimxrt10xx/tools/gen_peripherals_data.py b/ports/mimxrt10xx/tools/gen_peripherals_data.py
diff --git a/ports/raspberrypi/common-hal/microcontroller/Processor.c b/ports/raspberrypi/common-hal/microcontroller/Processor.c
diff --git a/ports/silabs/common-hal/microcontroller/Processor.c b/ports/silabs/common-hal/microcontroller/Processor.c
diff --git a/ports/stm/common-hal/microcontroller/Processor.c b/ports/stm/common-hal/microcontroller/Processor.c

Original file line number	Diff line number	Diff line change
`@@ -34,7 +34,7 @@ float common_hal_mcu_processor_get_temperature(void) {`
`34`	`34`	`}`
`35`	`35`
`36`	`36`	`float common_hal_mcu_processor_get_voltage(void) {`
`37`		`- return 1.2f;`
	`37`	`+ return NAN;`
`38`	`38`	`}`
`39`	`39`
`40`	`40`	`uint32_t common_hal_mcu_processor_get_frequency(void) {`
Original file line number	Diff line number	Diff line change
`@@ -54,7 +54,7 @@ float common_hal_mcu_processor_get_temperature(void) {`
`54`	`54`
`55`	`55`	`return temp;`
`56`	`56`	`#else`
`57`		`- return 0;`
	`57`	`+ return NAN;`
`58`	`58`	`#endif`
`59`	`59`	`}`
`60`	`60`