formatting(swan_r5): lexicographically sorted the board module names in the swan_r5 makefile include [ci-skip][skip-ci]. Skip CI since this is a cosmetic change only.

Author: m-mcgowan

ports/stm/boards/swan_r5/mpconfigboard.mk

@@ -15,63 +15,42 @@ LD_DEFAULT = boards/STM32L4R5_default.ld
 LD_BOOT = boards/STM32L4R5_boot.ld
 UF2_OFFSET = 0x8010000
 UF2_BOOTLOADER ?= 1
+CIRCUITPY_BUILD_EXTENSIONS = bin,uf2
 
-# Turn all of the below off while trying to get the thing to run
-# These modules are implemented in ports/<port>/common-hal:
-
-# Typically the first module to create
-CIRCUITPY_MICROCONTROLLER = 1
 CIRCUITPY_ALARM = 1
-
-# Typically the second module to create
-CIRCUITPY_DIGITALIO = 1
-# Other modules:
-
-CIRCUITPY_OS = 1
-CIRCUITPY_STORAGE = 1
-CIRCUITPY_USB_MSC = 1
-CIRCUITPY_UDB_CDC = 1
-CIRCUITPY_USB_VENDOR = 1
-CIRCUITPY_NVM = 0
-
 CIRCUITPY_ANALOGIO = 1
-CIRCUITPY_BUSIO = 1
-CIRCUITPY_NEOPIXEL_WRITE = 0
-CIRCUITPY_PULSEIO = 1
-CIRCUITPY_PWMIO = 1
+CIRCUITPY_AUDIOBUSIO = 1
+CIRCUITPY_AUDIOBUSIO_I2SOUT = 0
+CIRCUITPY_AUDIOBUSIO_PDMIN = 1
 CIRCUITPY_AUDIOPWMIO = 1
+CIRCUITPY_BITBANGIO = 1
+CIRCUITPY_BLEIO = 0
+CIRCUITPY_BLEIO_HCI = 0
+CIRCUITPY_BUSDEVICE = 0
+CIRCUITPY_BUSIO = 1
 CIRCUITPY_CANIO = 0
-CIRCUITPY_I2CTARGET = 0
-# Requires SPI, PulseIO (stub ok):
+CIRCUITPY_DIGITALIO = 1
 CIRCUITPY_DISPLAYIO = 1
-
-# These modules are implemented in shared-module/ - they can be included in
-# any port once their prerequisites in common-hal are complete.
-# Requires DigitalIO:
-CIRCUITPY_BITBANGIO = 1
-# Requires neopixel_write or SPI (dotstar)
+CIRCUITPY_ENABLE_MPY_NATIVE = 1
+CIRCUITPY_I2CTARGET = 0
+CIRCUITPY_KEYPAD = 1
+CIRCUITPY_MICROCONTROLLER = 1
+CIRCUITPY_NEOPIXEL_WRITE = 0
+CIRCUITPY_NVM = 0
+CIRCUITPY_OS = 1
 CIRCUITPY_PIXELBUF = 0
-# Requires OS
+CIRCUITPY_PULSEIO = 1
+CIRCUITPY_PWMIO = 1
 CIRCUITPY_RANDOM = 1
-# Requires Microcontroller
-CIRCUITPY_TOUCHIO = 1
-# Requires USB
-CIRCUITPY_USB_HID = 0
-CIRCUITPY_USB_MIDI = 0
-# Does nothing without I2C
 CIRCUITPY_REQUIRE_I2C_PULLUPS = 0
-# No requirements, but takes extra flash
-CIRCUITPY_ULAB = 1
-# requires SPI
-CIRCUITPY_SDCARDIO = 0
-CIRCUITPY_BLEIO_HCI = 0
-CIRCUITPY_BLEIO = 0
-CIRCUITPY_BUSDEVICE = 0
-CIRCUITPY_KEYPAD = 1
 CIRCUITPY_RGBMATRIX = 0
 CIRCUITPY_RTC = 1
-CIRCUITPY_BUILD_EXTENSIONS = bin,uf2
-CIRCUITPY_ENABLE_MPY_NATIVE = 1
-CIRCUITPY_AUDIOBUSIO = 1
-CIRCUITPY_AUDIOBUSIO_I2SOUT = 0
-CIRCUITPY_AUDIOBUSIO_PDMIN = 1
+CIRCUITPY_SDCARDIO = 0
+CIRCUITPY_STORAGE = 1
+CIRCUITPY_TOUCHIO = 1
+CIRCUITPY_UDB_CDC = 1
+CIRCUITPY_ULAB = 1
+CIRCUITPY_USB_HID = 0
+CIRCUITPY_USB_MIDI = 0
+CIRCUITPY_USB_MSC = 1
+CIRCUITPY_USB_VENDOR = 1