Merge pull request #8422 from jepler/qualia-revision

qualia: fixes for revision C

Author: tannewt

ports/espressif/boards/adafruit_qualia_s3_rgb666/mpconfigboard.h

@@ -32,9 +32,11 @@
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO18)
 
-#define MICROPY_HW_NEOPIXEL (&pin_GPIO4) // also DBLTAP
+#define DEFAULT_SPI_BUS_SCK (&pin_GPIO5)
+#define DEFAULT_SPI_BUS_MISO (&pin_GPIO6)
+#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO7)
 
-#define DOUBLE_TAP_PIN (&pin_GPIO4) // also NEOPIXEL
+#define DOUBLE_TAP_PIN (&pin_GPIO4)
 
 // a 1024x768 16BPP framebuffer + some breathing room
 #define DEFAULT_RESERVED_PSRAM      (1024 * 1024 * 2)

ports/espressif/boards/adafruit_qualia_s3_rgb666/pins.c

@@ -76,14 +76,18 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
 
     { MP_ROM_QSTR(MP_QSTR_TFT_PINS), MP_ROM_PTR(&tft_dict) },
     { MP_ROM_QSTR(MP_QSTR_TFT_IO_EXPANDER), MP_ROM_PTR(&tft_io_expander_dict) },
-    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(MICROPY_HW_NEOPIXEL) },
 
     { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
     { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
 
     { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(DEFAULT_I2C_BUS_SDA) },
     { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(DEFAULT_I2C_BUS_SCL) },
 
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(DEFAULT_SPI_BUS_MISO) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(DEFAULT_SPI_BUS_MOSI) },
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(DEFAULT_SPI_BUS_SCK) },
+    { MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_GPIO15) },
+
     // I/O expander pin numbers
     { MP_ROM_QSTR(MP_QSTR_TFT_SCK), MP_ROM_INT(0) },
     { MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_INT(1) },
@@ -96,5 +100,6 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
 
     { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
     { MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
 };
 MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);