Merge branch 'main' into typing-fixes

justmobilize · justmobilize · commit e90687352734 · 2024-02-09T08:36:21.000-08:00
diff --git a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk
@@ -20,7 +20,7 @@ CIRCUITPY_USB_MIDI = 0
 # So not all of displayio, sorry!
 CIRCUITPY_VECTORIO = 0
 CIRCUITPY_BITMAPTOOLS = 0
-CIRCUITPY_PARALLELDISPLAY = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
 
 # Include these Python libraries in firmware.
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_CircuitPlayground/frozen_cpx
diff --git a/ports/atmel-samd/boards/matrixportal_m4/mpconfigboard.mk b/ports/atmel-samd/boards/matrixportal_m4/mpconfigboard.mk
@@ -14,7 +14,7 @@ CIRCUITPY_LTO_PARTITION = one
 
 CIRCUITPY_AESIO = 0
 CIRCUITPY_FLOPPYIO = 0
-CIRCUITPY_PARALLELDISPLAY = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
 CIRCUITPY_SHARPDISPLAY = 0
 CIRCUITPY_ULAB = 0
 
diff --git a/ports/atmel-samd/boards/pewpew_m4/mpconfigboard.mk b/ports/atmel-samd/boards/pewpew_m4/mpconfigboard.mk
@@ -22,7 +22,7 @@ CIRCUITPY_FREQUENCYIO = 0
 CIRCUITPY_I2CTARGET = 0
 CIRCUITPY_NEOPIXEL_WRITE = 0
 CIRCUITPY_ONEWIREIO = 0
-CIRCUITPY_PARALLELDISPLAY = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
 CIRCUITPY_PIXELBUF = 0
 CIRCUITPY_PS2IO = 0
 CIRCUITPY_PULSEIO = 0
diff --git a/ports/atmel-samd/boards/ugame10/mpconfigboard.mk b/ports/atmel-samd/boards/ugame10/mpconfigboard.mk
@@ -24,7 +24,7 @@ CIRCUITPY_BITMAPTOOLS = 0
 CIRCUITPY_FREQUENCYIO = 0
 CIRCUITPY_I2CTARGET = 0
 CIRCUITPY_NEOPIXEL_WRITE = 0
-CIRCUITPY_PARALLELDISPLAY = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
 CIRCUITPY_PIXELBUF = 0
 CIRCUITPY_RTC = 0
 CIRCUITPY_TOUCHIO = 0
diff --git a/ports/espressif/Makefile b/ports/espressif/Makefile
@@ -490,6 +490,9 @@ endif
 ifneq ($(CIRCUITPY_DOTCLOCKFRAMEBUFFER),0)
 	ESP_IDF_COMPONENTS_LINK += esp_lcd
 endif
+ifneq ($(CIRCUITPY_PARALLELDISPLAYBUS),0)
+	ESP_IDF_COMPONENTS_LINK += esp_lcd
+endif
 
 ESP_IDF_COMPONENTS_EXPANDED = $(foreach component, $(ESP_IDF_COMPONENTS_LINK), $(BUILD)/esp-idf/esp-idf/$(component)/lib$(component).a)
 
diff --git a/ports/espressif/boards/adafruit_esp32s3_camera/mpconfigboard.mk b/ports/espressif/boards/adafruit_esp32s3_camera/mpconfigboard.mk
@@ -20,7 +20,7 @@ CIRCUITPY_ESPCAMERA = 1
 CIRCUITPY_FRAMEBUFFERIO = 0
 CIRCUITPY_KEYPAD = 0
 CIRCUITPY_ONEWIREIO = 0
-CIRCUITPY_PARALLELDISPLAY = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
 CIRCUITPY_RGBMATRIX = 0
 CIRCUITPY_ROTARYIO = 0
 
diff --git a/ports/espressif/boards/adafruit_feather_esp32s3_4mbflash_2mbpsram/mpconfigboard.mk b/ports/espressif/boards/adafruit_feather_esp32s3_4mbflash_2mbpsram/mpconfigboard.mk
@@ -15,3 +15,4 @@ CIRCUITPY_ESP_PSRAM_FREQ = 80m
 
 OPTIMIZATION_FLAGS = -Os
 CIRCUITPY_ESPCAMERA = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
diff --git a/ports/espressif/boards/adafruit_feather_esp32s3_reverse_tft/mpconfigboard.mk b/ports/espressif/boards/adafruit_feather_esp32s3_reverse_tft/mpconfigboard.mk
@@ -15,5 +15,6 @@ CIRCUITPY_ESP_PSRAM_MODE = qio
 CIRCUITPY_ESP_PSRAM_FREQ = 80m
 
 CIRCUITPY_ESPCAMERA = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
 
 OPTIMIZATION_FLAGS = -Os
diff --git a/ports/espressif/boards/adafruit_feather_esp32s3_tft/mpconfigboard.mk b/ports/espressif/boards/adafruit_feather_esp32s3_tft/mpconfigboard.mk
@@ -12,6 +12,7 @@ CIRCUITPY_ESP_FLASH_SIZE = 4MB
 
 OPTIMIZATION_FLAGS = -Os
 CIRCUITPY_ESPCAMERA = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
 
 CIRCUITPY_ESP_PSRAM_SIZE = 2MB
 CIRCUITPY_ESP_PSRAM_MODE = qio
diff --git a/ports/espressif/boards/adafruit_matrixportal_s3/mpconfigboard.mk b/ports/espressif/boards/adafruit_matrixportal_s3/mpconfigboard.mk
@@ -14,3 +14,6 @@ CIRCUITPY_ESP_PSRAM_MODE = qio
 CIRCUITPY_ESP_PSRAM_FREQ = 80m
 
 CIRCUITPY_ESP32_CAMERA = 0
+
+# Not enough pins.
+CIRCUITPY_PARALLELDISPLAYBUS = 0
diff --git a/ports/espressif/boards/adafruit_qtpy_esp32_pico/mpconfigboard.mk b/ports/espressif/boards/adafruit_qtpy_esp32_pico/mpconfigboard.mk
@@ -10,3 +10,6 @@ CIRCUITPY_ESP_FLASH_FREQ = 80m
 CIRCUITPY_ESP_PSRAM_SIZE = 2MB
 CIRCUITPY_ESP_PSRAM_MODE = qio
 CIRCUITPY_ESP_PSRAM_FREQ = 80m
+
+# Not enough pins.
+CIRCUITPY_PARALLELDISPLAYBUS = 0
diff --git a/ports/espressif/boards/adafruit_qtpy_esp32c3/mpconfigboard.mk b/ports/espressif/boards/adafruit_qtpy_esp32c3/mpconfigboard.mk
@@ -10,3 +10,6 @@ CIRCUITPY_ESP_FLASH_SIZE = 4MB
 CIRCUITPY_ESP_USB_SERIAL_JTAG = 1
 
 CIRCUITPY_BLEIO = 0
+
+# Not enough pins.
+CIRCUITPY_PARALLELDISPLAYBUS = 0
diff --git a/ports/espressif/boards/adafruit_qtpy_esp32s2/mpconfigboard.mk b/ports/espressif/boards/adafruit_qtpy_esp32s2/mpconfigboard.mk
@@ -13,3 +13,6 @@ CIRCUITPY_ESP_FLASH_SIZE = 4MB
 CIRCUITPY_ESP_PSRAM_SIZE = 2MB
 CIRCUITPY_ESP_PSRAM_MODE = qio
 CIRCUITPY_ESP_PSRAM_FREQ = 80m
+
+# Not enough pins.
+CIRCUITPY_PARALLELDISPLAYBUS = 0
diff --git a/ports/espressif/boards/adafruit_qtpy_esp32s3_4mbflash_2mbpsram/mpconfigboard.mk b/ports/espressif/boards/adafruit_qtpy_esp32s3_4mbflash_2mbpsram/mpconfigboard.mk
@@ -15,3 +15,5 @@ CIRCUITPY_ESP_PSRAM_FREQ = 80m
 
 OPTIMIZATION_FLAGS = -Os
 CIRCUITPY_ESPCAMERA = 0
+# Not enough pins.
+CIRCUITPY_PARALLELDISPLAYBUS = 0
diff --git a/ports/espressif/boards/adafruit_qtpy_esp32s3_nopsram/mpconfigboard.mk b/ports/espressif/boards/adafruit_qtpy_esp32s3_nopsram/mpconfigboard.mk
@@ -11,3 +11,6 @@ CIRCUITPY_ESP_FLASH_FREQ = 80m
 CIRCUITPY_ESP_FLASH_SIZE = 8MB
 
 CIRCUITPY_ESPCAMERA = 0
+
+# Not enough pins.
+CIRCUITPY_PARALLELDISPLAYBUS = 0
diff --git a/ports/espressif/boards/deneyap_kart_1a_v2/mpconfigboard.mk b/ports/espressif/boards/deneyap_kart_1a_v2/mpconfigboard.mk
@@ -16,5 +16,6 @@ CIRCUITPY_ESP_PSRAM_FREQ = 80m
 
 CIRCUITPY_ESPCAMERA = 0
 CIRCUITPY_BITMAPFILTER = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
 
 OPTIMIZATION_FLAGS = -Os
diff --git a/ports/espressif/boards/lilygo_tdisplay_s3/board.c b/ports/espressif/boards/lilygo_tdisplay_s3/board.c
@@ -0,0 +1,131 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "shared-module/displayio/__init__.h"
+#include "shared-module/displayio/mipi_constants.h"
+
+#define DELAY 0x80
+
+// display init sequence according to LilyGO example app
+uint8_t display_init_sequence[] = {
+    // sw reset
+    0x01, 0 | DELAY, 150,
+    // sleep out
+    0x11, 0 | DELAY, 255,
+    // colmod and delay 10ms
+    0x3A, 1 | DELAY,  0x55, 10,
+    0x21, 0 | DELAY, 10,
+    // normal display mode on
+    0x13, 0 | DELAY, 10,
+    // madctl display and color format settings
+    0x36, 1, 0x60,
+    // ST7789V gamma setting
+    // 0xE0, 14, 0xD0, 0x00, 0x02, 0x07, 0x0A, 0x28, 0x32, 0x44, 0x42, 0x06, 0x0E, 0x12, 0x14, 0x17,
+    // 0xE1, 14, 0xD0, 0x00, 0x02, 0x07, 0x0A, 0x28, 0x31, 0x54, 0x47, 0x0E, 0x1C, 0x17, 0x1B, 0x1E,
+
+    // display on
+    0x29, 0 | DELAY, 255,
+};
+
+static void display_init(void) {
+
+    gpio_set_direction(15, GPIO_MODE_DEF_OUTPUT);
+    gpio_set_level(15, true);
+
+    paralleldisplaybus_parallelbus_obj_t *bus = &allocate_display_bus()->parallel_bus;
+    bus->base.type = &paralleldisplaybus_parallelbus_type;
+    const mcu_pin_obj_t *data_pins[] = {
+        &pin_GPIO39,
+        &pin_GPIO40,
+        &pin_GPIO41,
+        &pin_GPIO42,
+        &pin_GPIO45,
+        &pin_GPIO46,
+        &pin_GPIO47,
+        &pin_GPIO48
+    };
+    common_hal_paralleldisplaybus_parallelbus_construct_nonsequential(bus,
+        8, // num pins
+        data_pins, // Data pins
+        &pin_GPIO7, // Command or data
+        &pin_GPIO6, // Chip select
+        &pin_GPIO8, // Write
+        &pin_GPIO9, // Read
+        &pin_GPIO5, // Reset
+        15000000); // Frequency. ST7789 datasheet says min clock cycle is 66ns which is ~15 mhz.
+
+    busdisplay_busdisplay_obj_t *display = &allocate_display()->display;
+    display->base.type = &busdisplay_busdisplay_type;
+    common_hal_busdisplay_busdisplay_construct(display,
+        bus,
+        320, // Width
+        170, // Height
+        0, // column start
+        35, // row start
+        0, // rotation
+        16, // Color depth
+        false, // grayscale
+        false, // pixels_in_byte_share_row (unused for depths > 8)
+        1, // bytes per cell. Only valid for depths < 8
+        false, // reverse_pixels_in_byte. Only valid for depths < 8
+        true, // reverse_pixels_in_word
+        MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command
+        MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command
+        MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command
+        display_init_sequence,
+        sizeof(display_init_sequence),
+        &pin_GPIO38, // Backlight pin
+        NO_BRIGHTNESS_COMMAND,
+        1.0f, // brightness
+        false, // single_byte_bounds
+        false, // data_as_commands
+        true, // auto_refresh
+        60, // native_frames_per_second
+        true, // backlight_on_high
+        false, // SH1107_addressing
+        50000); // backlight pwm frequency
+}
+
+void board_init(void) {
+    // Display
+    display_init();
+}
+
+bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
+    // Override the I2C/TFT power pin reset to prevent resetting the display.
+    if (pin_number == 15) {
+        // Turn on TFT
+        gpio_set_direction(pin_number, GPIO_MODE_DEF_OUTPUT);
+        gpio_set_level(pin_number, true);
+        return true;
+    }
+    return false;
+}
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
diff --git a/ports/espressif/boards/lilygo_tdisplay_s3/mpconfigboard.h b/ports/espressif/boards/lilygo_tdisplay_s3/mpconfigboard.h
@@ -3,7 +3,7 @@
  *
  * The MIT License (MIT)
  *
- * Copyright (c) 2021 Jeff Epler for Adafruit Industries
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
@@ -24,19 +24,10 @@
  * THE SOFTWARE.
  */
 
-#pragma once
+// Micropython setup
 
-#include "py/obj.h"
-#include "shared-bindings/imagecapture/ParallelImageCapture.h"
-#include "cam.h"
+#define MICROPY_HW_BOARD_NAME       "LILYGO T-DISPLAY S3 v1.2"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
 
-struct imagecapture_parallelimagecapture_obj {
-    mp_obj_base_t base;
-    cam_config_t config;
-    gpio_num_t data_clock;
-    gpio_num_t vertical_sync;
-    gpio_num_t horizontal_reference;
-    uint8_t data_count;
-    mp_obj_t buffer1, buffer2;
-    uint8_t *buffer_to_give;
-};
+#define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
+#define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
diff --git a/ports/espressif/boards/lilygo_tdisplay_s3/mpconfigboard.mk b/ports/espressif/boards/lilygo_tdisplay_s3/mpconfigboard.mk
@@ -0,0 +1,14 @@
+USB_VID = 0x303a
+USB_PID = 0x813F
+USB_PRODUCT = "T-Display S3"
+USB_MANUFACTURER = "LILYGO"
+
+IDF_TARGET = esp32s3
+
+CIRCUITPY_ESP_FLASH_SIZE = 16MB
+CIRCUITPY_ESP_FLASH_MODE = qio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+
+CIRCUITPY_ESP_PSRAM_SIZE = 8MB
+CIRCUITPY_ESP_PSRAM_MODE = opi
+CIRCUITPY_ESP_PSRAM_FREQ = 80m
diff --git a/ports/espressif/boards/lilygo_tdisplay_s3/pins.c b/ports/espressif/boards/lilygo_tdisplay_s3/pins.c
@@ -0,0 +1,59 @@
+#include "shared-bindings/board/__init__.h"
+#include "shared-module/displayio/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON1), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
+
+    // Left side
+    { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
+
+    // Right side.
+    { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_SDA), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_SCL), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_TOUCH_SDA), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_TOUCH_SCL), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_TOUCH_RES), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_TOUCH_INT), MP_ROM_PTR(&pin_GPIO16) },
+
+    // 1.14 inch LCD ST7789
+    { MP_ROM_QSTR(MP_QSTR_LCD_BCKL), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_D0), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_D1), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_D2), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_D3), MP_ROM_PTR(&pin_GPIO42) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_D4), MP_ROM_PTR(&pin_GPIO45) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_D5), MP_ROM_PTR(&pin_GPIO46) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_D6), MP_ROM_PTR(&pin_GPIO47) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_D7), MP_ROM_PTR(&pin_GPIO48) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_WR), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_RD), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_DC), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_CS), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_RST), MP_ROM_PTR(&pin_GPIO5) },
+
+    { MP_ROM_QSTR(MP_QSTR_LCD_POWER_ON), MP_ROM_PTR(&pin_GPIO15) },
+
+    { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display) },
+
+    // Battery Sense
+    { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO4) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
diff --git a/ports/espressif/boards/lilygo_tdisplay_s3/sdkconfig b/ports/espressif/boards/lilygo_tdisplay_s3/sdkconfig
@@ -0,0 +1,15 @@
+#
+# Espressif IoT Development Framework Configuration
+#
+#
+# Component config
+#
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="T-DISPLAY-S3"
+# end of LWIP
+
+# end of Component config
+
+# end of Espressif IoT Development Framework Configuration
diff --git a/ports/espressif/boards/lolin_s3_mini/mpconfigboard.mk b/ports/espressif/boards/lolin_s3_mini/mpconfigboard.mk
@@ -17,6 +17,7 @@ OPTIMIZATION_FLAGS = -Os
 CIRCUITPY_ESPCAMERA = 0
 CIRCUITPY_BITMAPFILTER = 0
 CIRCUITPY_CODEOP=0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
 
 # Include these Python libraries in firmware.
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
diff --git a/ports/espressif/boards/waveshare_esp32_s3_zero/mpconfigboard.mk b/ports/espressif/boards/waveshare_esp32_s3_zero/mpconfigboard.mk
@@ -16,6 +16,7 @@ CIRCUITPY_ESP_PSRAM_FREQ = 80m
 OPTIMIZATION_FLAGS = -Os
 CIRCUITPY_ESPCAMERA = 0
 CIRCUITPY_BITMAPFILTER = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
 
 # Include these Python libraries in firmware.
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
diff --git a/ports/espressif/common-hal/imagecapture/ParallelImageCapture.c b/ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
diff --git a/ports/espressif/common-hal/imagecapture/__init__.c b/ports/espressif/common-hal/imagecapture/__init__.c
diff --git a/ports/espressif/common-hal/imagecapture/__init__.h b/ports/espressif/common-hal/imagecapture/__init__.h
diff --git a/ports/espressif/common-hal/paralleldisplaybus/ParallelBus.c b/ports/espressif/common-hal/paralleldisplaybus/ParallelBus.c
diff --git a/ports/espressif/common-hal/paralleldisplaybus/ParallelBus.h b/ports/espressif/common-hal/paralleldisplaybus/ParallelBus.h
diff --git a/ports/espressif/mpconfigport.mk b/ports/espressif/mpconfigport.mk
diff --git a/ports/raspberrypi/boards/lilygo_t_display_rp2040/pins.c b/ports/raspberrypi/boards/lilygo_t_display_rp2040/pins.c
diff --git a/shared-bindings/paralleldisplaybus/ParallelBus.c b/shared-bindings/paralleldisplaybus/ParallelBus.c
diff --git a/shared-bindings/synthio/LFO.c b/shared-bindings/synthio/LFO.c
diff --git a/tools/board_stubs/circuitpython_setboard/__init__.py b/tools/board_stubs/circuitpython_setboard/__init__.py

Original file line number	Diff line number	Diff line change
`@@ -15,3 +15,4 @@ CIRCUITPY_ESP_PSRAM_FREQ = 80m`
`15`	`15`
`16`	`16`	`OPTIMIZATION_FLAGS = -Os`
`17`	`17`	`CIRCUITPY_ESPCAMERA = 0`
	`18`	`+CIRCUITPY_PARALLELDISPLAYBUS = 0`