Started to add linux 64 bit support, by copying the linux folder to linux64 and changeing platform.txt. Also copied scr folder into each platform's folder to allow the src to be distributed even if the tools are split up when using the Board Manager

Author: rogerclarkmelbourne

STM32F1/platform.txt

@@ -107,15 +107,13 @@ recipe.output.save_file={build.project_name}.{build.variant}.bin
 # Uploader tools
 # -------------------
 
-
-
 # Upload using Maple bootloader over DFU
 tools.maple_upload.cmd=maple_upload
 tools.maple_upload.cmd.windows=maple_upload.bat
 tools.maple_upload.path={runtime.hardware.path}/tools/win
 tools.maple_upload.path.macosx={runtime.hardware.path}/tools/macosx
-tools.maple_upload.path.linux={runtime.hardware.path}/tools/linux    
-
+tools.maple_upload.path.linux={runtime.hardware.path}/tools/linux
+tools.maple_upload.path.linux64={runtime.hardware.path}/tools/linux64    
 tools.maple_upload.upload.params.verbose=-d
 tools.maple_upload.upload.params.quiet=
 tools.maple_upload.upload.pattern="{path}/{cmd}" {serial.port.file} {upload.altID} {upload.usbID} "{build.path}/{build.project_name}.bin"
@@ -129,29 +127,18 @@ tools.serial_upload.cmd.macosx=serial_upload
 tools.serial_upload.path={runtime.hardware.path}/tools/win
 tools.serial_upload.path.macosx={runtime.hardware.path}/tools/macosx
 tools.serial_upload.path.linux={runtime.hardware.path}/tools/linux
-
+tools.serial_upload.path.linux64={runtime.hardware.path}/tools/linux64
 tools.serial_upload.upload.params.verbose=-d
 tools.serial_upload.upload.params.quiet=n
 tools.serial_upload.upload.pattern="{path}/{cmd}" {serial.port.file} {upload.altID} {upload.usbID} "{build.path}/{build.project_name}.bin"
 
-
-tools.upload_router.cmd=upload_router
-tools.upload_router.cmd.windows=upload_router.bat
-tools.upload_router.path={runtime.hardware.path}/tools/win
-tools.upload_router.path.macosx={runtime.hardware.path}/tools/macosx
-tools.upload_router.path.linux={runtime.hardware.path}/tools/linux
-
-tools.upload_router.upload.params.verbose=-d
-tools.upload_router.upload.params.quiet=
-tools.upload_router.upload.pattern="{path}/{cmd}" {serial.port.file} {upload.altID} {upload.usbID} "{build.path}/{build.project_name}" {upload.protocol} {build.debuggingMode} "{runtime.ide.path}/hardware/tools/{build.gcc_ver}/bin/"
-
 # stlink upload
 tools.stlink_upload.cmd=stlink_upload
 tools.stlink_upload.cmd.windows=stlink_upload.bat
 tools.stlink_upload.path.windows={runtime.hardware.path}/tools/win
 tools.stlink_upload.path.macosx={runtime.hardware.path}/tools/macosx
 tools.stlink_upload.path.linux={runtime.hardware.path}/tools/linux
-
+tools.stlink_upload.path.linux64={runtime.hardware.path}/tools/linux64
 tools.stlink_upload.upload.params.verbose=-d
 tools.stlink_upload.upload.params.quiet=
 tools.stlink_upload.upload.pattern="{path}/{cmd}" {serial.port.file} {upload.altID} {upload.usbID} "{build.path}/{build.project_name}.bin"
@@ -162,4 +149,4 @@ tools.bmp_upload.path={runtime.tools.arm-none-eabi-gcc.path}/bin/
 tools.bmp_upload.upload.speed=230400
 tools.bmp_upload.upload.params.verbose=
 tools.bmp_upload.upload.params.quiet=-q --batch-silent
-tools.bmp_upload.upload.pattern="{path}{cmd}" -cd "{build.path}" -b {upload.speed} {upload.verbose} -ex "set debug remote 0" -ex "set target-async off" -ex "set remotetimeout 60" -ex "set mem inaccessible-by-default off" -ex "set confirm off" -ex "set height 0" -ex "target extended-remote {serial.port}" -ex "monitor swdp_scan" -ex "attach 1" -ex "x/wx 0x8000004" -ex "monitor erase_mass" -ex "echo 0x8000004 expect 0xffffffff after erase\n" -ex "x/wx 0x8000004" -ex "file {build.project_name}.elf" -ex "load" -ex "x/wx 0x08000004" -ex "tbreak main" -ex "run" -ex "echo \n\n\nUpload finished!" -ex "quit"
+tools.bmp_upload.upload.pattern="{path}{cmd}" -cd "{build.path}" -b {upload.speed} {upload.verbose} -ex "set debug remote 0" -ex "set target-async off" -ex "set remotetimeout 60" -ex "set mem inaccessible-by-default off" -ex "set confirm off" -ex "set height 0" -ex "target extended-remote {serial.port}" -ex "monitor swdp_scan" -ex "attach 1" -ex "x/wx 0x8000004" -ex "monitor erase_mass" -ex "echo 0x8000004 expect 0xffffffff after erase\n" -ex "x/wx 0x8000004" -ex "file {build.project_name}.elf" -ex "load" -ex "x/wx 0x08000004" -ex "tbreak main" -ex "run" -ex "echo \n\n\nUpload finished!" -ex "quit"

tools/src/build_dfu-util.sh tools/linux/src/build_dfu-util.shtools/src/build_dfu-util.sh renamed to tools/linux/src/build_dfu-util.sh

@@ -1,30 +1,30 @@
-Authors ordered by first contribution.
-
-Harald Welte
-Werner Almesberger
-Michael Lauer
-Jim Huang
-Stefan Schmidt
-Daniel Willmann
-Mike Frysinger
-Uwe Hermann
-C. Scott Ananian
-Bernard Blackham
-Holger Freyther
-Marc Singer
-James Perkins
-Tommi Keisala
-Pascal Schweizer
-Bradley Scott
-Uwe Bonnes
-Andrey Smirnov
-Jussi Timperi
-Hans Petter Selasky
-Bo Shen
-Henrique de Almeida Mendonca
-Bernd Krumboeck
-Dennis Meier
-Veli-Pekka Peltola
-Dave Hylands
-Michael Grzeschik
-Paul Fertser
+Authors ordered by first contribution.
+
+Harald Welte
+Werner Almesberger
+Michael Lauer
+Jim Huang
+Stefan Schmidt
+Daniel Willmann
+Mike Frysinger
+Uwe Hermann
+C. Scott Ananian
+Bernard Blackham
+Holger Freyther
+Marc Singer
+James Perkins
+Tommi Keisala
+Pascal Schweizer
+Bradley Scott
+Uwe Bonnes
+Andrey Smirnov
+Jussi Timperi
+Hans Petter Selasky
+Bo Shen
+Henrique de Almeida Mendonca
+Bernd Krumboeck
+Dennis Meier
+Veli-Pekka Peltola
+Dave Hylands
+Michael Grzeschik
+Paul Fertser