Removed non standard functionality from Print class for BYTE "base" as this is available via e.g. Serial.write and conflicts with the FatFS library and potentially anything else defining BYTE

Fixed sketches using this behaviour

Author: sweetlilmre

STM32F1/cores/maple/Print.cpp

@@ -99,10 +99,6 @@ size_t Print::print(unsigned long n, int base) {
 }
 
 size_t Print::print(long long n, int base) {
-    if (base == BYTE) 
-	{
-        return write((uint8)n);
-    }
     if (n < 0) {
         print('-');
         n = -n;
@@ -111,13 +107,7 @@ size_t Print::print(long long n, int base) {
 }
 
 size_t Print::print(unsigned long long n, int base) {
-size_t c=0;
-    if (base == BYTE) {
-        c= write((uint8)n);
-    } else {
-        c= printNumber(n, base);
-    }
-	return c;
+	return printNumber(n, base);
 }
 
 size_t Print::print(double n, int digits) {

STM32F1/cores/maple/Print.h

@@ -28,7 +28,6 @@
 #include "Printable.h"
 
 enum {
-    BYTE = 0,
     BIN  = 2,
     OCT  = 8,
     DEC  = 10,

STM32F1/libraries/A_STM32_Examples/examples/Communication/ASCIITable/ASCIITable.ino

@@ -47,7 +47,7 @@ void loop() {
     // Prints value unaltered, i.e. the raw binary version of the
     // byte. The serial monitor interprets all bytes as
     // ASCII, so 33, the first number,  will show up as '!'
-    Serial.print(thisByte, BYTE);
+    Serial.write(thisByte);
 
     Serial.print(", dec: ");
     // Prints value as string as an ASCII-encoded decimal (base 10).

STM32F1/libraries/A_STM32_Examples/examples/Communication/MIDI/Midi.ino

@@ -44,8 +44,8 @@ void loop() {
 // Plays a MIDI note.  Doesn't check to see that cmd is greater than
 // 127, or that data values are less than 127:
 void noteOn(int cmd, int pitch, int velocity) {
-    Serial1.print(cmd, BYTE);
-    Serial1.print(pitch, BYTE);
-    Serial1.print(velocity, BYTE);
+    Serial1.write(cmd);
+    Serial1.write(pitch);
+    Serial1.write(velocity);
 }
 

STM32F1/libraries/A_STM32_Examples/examples/Communication/SerialCallResponse/SerialCallResponse.ino

@@ -50,15 +50,15 @@ void loop() {
         // read switch, map it to 0 or 255
         thirdSensor = map(digitalRead(2), 0, 1, 0, 255);
         // send sensor values:
-        Serial.print(firstSensor, BYTE);
-        Serial.print(secondSensor, BYTE);
-        Serial.print(thirdSensor, BYTE);
+        Serial.write(firstSensor);
+        Serial.write(secondSensor);
+        Serial.write(thirdSensor);
     }
 }
 
 void establishContact() {
     while (Serial.available() <= 0) {
-        Serial.print('A', BYTE);   // send a capital A
+        Serial.write('A');   // send a capital A
         delay(300);
     }
 }

STM32F1/libraries/A_STM32_Examples/examples/Communication/SerialPassthrough/SerialPassthrough.ino

@@ -26,6 +26,6 @@ void loop() {
     // Read from Serial1, send over USB on Maple (or uses hardware serial 1 and hardware serial 2 on non-maple boards:
     if (Serial1.available()) {
         inByte = Serial1.read();
-        Serial.print(inByte, BYTE);
+        Serial.write(inByte);
     }
 }

STM32F1/libraries/A_STM32_Examples/examples/General/USB_ASCII/USB_ASCII.ino

@@ -67,7 +67,7 @@ void loop() {
     // Prints value unaltered, i.e. the raw binary version of the
     // byte. The serial monitor interprets all bytes as
     // ASCII, so 33, the first number,  will show up as '!'
-    Serial.print(thisByte, BYTE);
+    Serial.write(thisByte);
 
     Serial.print(", dec: ");
     // Prints value as string as an ASCII-encoded decimal (base 10).

STM32F3/cores/maple/wirish/Print.cpp

@@ -88,10 +88,6 @@ void Print::print(unsigned long n, int base) {
 }
 
 void Print::print(long long n, int base) {
-    if (base == BYTE) {
-        write((uint8)n);
-        return;
-    }
     if (n < 0) {
         print('-');
         n = -n;
@@ -100,11 +96,7 @@ void Print::print(long long n, int base) {
 }
 
 void Print::print(unsigned long long n, int base) {
-    if (base == BYTE) {
-        write((uint8)n);
-    } else {
-        printNumber(n, base);
-    }
+    printNumber(n, base);
 }
 
 void Print::print(double n, int digits) {

STM32F3/cores/maple/wirish/Print.h

@@ -26,7 +26,6 @@
 #include <libmaple/libmaple_types.h>
 
 enum {
-    BYTE = 0,
     BIN  = 2,
     OCT  = 8,
     DEC  = 10,

STM32F4/cores/maple/Print.cpp

@@ -99,10 +99,6 @@ size_t Print::print(unsigned long n, int base) {
 }
 
 size_t Print::print(long long n, int base) {
-    if (base == BYTE) 
-	{
-        return write((uint8)n);
-    }
     if (n < 0) {
         print('-');
         n = -n;
@@ -111,13 +107,7 @@ size_t Print::print(long long n, int base) {
 }
 
 size_t Print::print(unsigned long long n, int base) {
-size_t c=0;
-    if (base == BYTE) {
-        c= write((uint8)n);
-    } else {
-        c= printNumber(n, base);
-    }
-	return c;
+	return printNumber(n, base);
 }
 
 size_t Print::print(double n, int digits) {