add more details to tech, move very deep stuck

kjbranch · kjbranch · commit 002f37cfb526 · 2025-08-05T15:57:08.000-06:00
diff --git a/region/brinstar/blue/Construction Zone.json b/region/brinstar/blue/Construction Zone.json
@@ -803,6 +803,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canXRayClimb"
       ],
       "bypassesDoorShell": true,
diff --git a/region/brinstar/green/Etecoon Energy Tank Room.json b/region/brinstar/green/Etecoon Energy Tank Room.json
@@ -844,6 +844,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canXRayClimb"
       ],
       "bypassesDoorShell": true,
diff --git a/region/brinstar/green/Green Brinstar Main Shaft.json b/region/brinstar/green/Green Brinstar Main Shaft.json
@@ -1534,6 +1534,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canXRayClimb"
       ],
       "bypassesDoorShell": true,
@@ -2364,6 +2365,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canLongXRayClimb"
       ],
       "bypassesDoorShell": true,
@@ -2444,6 +2446,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canXRayClimb"
       ],
       "bypassesDoorShell": true,
@@ -3043,6 +3046,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canLongXRayClimb"
       ],
       "bypassesDoorShell": true,
@@ -3626,6 +3630,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canLongXRayClimb",
         "canBePatient"
       ],
@@ -3706,6 +3711,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canXRayClimb"
       ],
       "bypassesDoorShell": true,
@@ -3964,6 +3970,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canLongXRayClimb",
         "canBeVeryPatient"
       ],
@@ -4029,6 +4036,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canLongXRayClimb",
         "canBeVeryPatient"
       ],
@@ -4072,6 +4080,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canLongXRayClimb",
         "canBePatient"
       ],
diff --git a/region/brinstar/kraid/Warehouse Zeela Room.json b/region/brinstar/kraid/Warehouse Zeela Room.json
@@ -277,6 +277,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canXRayClimb"
       ],
       "bypassesDoorShell": true,
diff --git a/region/brinstar/pink/Big Pink.json b/region/brinstar/pink/Big Pink.json
@@ -1736,6 +1736,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canLongXRayClimb",
         "canBePatient"
       ],
@@ -2301,6 +2302,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canLongXRayClimb",
         "canBeVeryPatient"
       ],
@@ -2322,6 +2324,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canLongXRayClimb"
       ],
       "bypassesDoorShell": true,
diff --git a/region/brinstar/pink/Dachora Room.json b/region/brinstar/pink/Dachora Room.json
@@ -545,6 +545,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canLongXRayClimb",
         "canBeVeryPatient"
       ],
diff --git a/region/brinstar/pink/Mission Impossible Room.json b/region/brinstar/pink/Mission Impossible Room.json
@@ -630,6 +630,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canXRayClimb"
       ],
       "bypassesDoorShell": true,
diff --git a/region/brinstar/pink/Spore Spawn Super Room.json b/region/brinstar/pink/Spore Spawn Super Room.json
@@ -178,6 +178,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canLongXRayClimb",
         "canBeVeryPatient"
       ],
diff --git a/region/brinstar/red/Below Spazer.json b/region/brinstar/red/Below Spazer.json
@@ -657,6 +657,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canXRayClimb"
       ],
       "bypassesDoorShell": true,
diff --git a/region/brinstar/red/Red Tower.json b/region/brinstar/red/Red Tower.json
@@ -1276,6 +1276,7 @@
         }
       },
       "requires": [
+        "canComplexGMode",
         "canLongXRayClimb"
       ],
       "bypassesDoorShell": true,
diff --git a/tech.json b/tech.json
@@ -2505,9 +2505,18 @@
               ],
               "otherRequires": [],
               "note": [
-                "Ability to enter G-mode starting with low reserve energy.",
-                "Have 4 or fewer energy in reserves (set to Auto), take damage while going through a door, use X-Ray while entering the next room, and release X-Ray before reserves have finished filling (a 4-frame window when starting with 4 reserve energy).",
-                "This can be used for many things, including overloading PLMs to move through solid tiles, setting up a deep doorstuck, and triggering Artificial Morph if canArtificialMorph is enabled."
+                "Ability to enter G-mode and utilize the unusual behaviors that it enables. This requires X-Ray, Reserve Energy, and reserves set to Auto refill.",
+                "In order to enter G-mode, Samus needs to take damage after touching a room transition so that she immediately takes damage and triggers the refill while entering the next room.",
+                "In addition, she needs to be using X-Ray while entering the room and release X-Ray before reserves have finished filling.",
+                "For the simplest cases, Samus will need to start with 4 (or fewer) Reserve Energy, giving a 4-frame window to release X-Ray in the next room (or fewer: 1-frame per Reserve Energy).",
+                "When successfully entering G-mode, the room will darken and the door will remain open (releasing X-Ray too early, neither of these occur; releasing it too late, the room darkens and the door closes - this is R-mode).",
+                "While in G-mode, many things do not behave as expected until exiting G-mode by using X-Ray - Samus can not open doors, collect items, or break blocks, and enemy drops do not spawn and their projectiles are invisible and do not move.",
+                "If Samus can overload PLMs, many types of blocks change their behavior: bomb, crumble, speed blocks, and sand behave as air (Power Bomb and shot blocks remain solid).",
+                "The most common ways to overload PLMs include: bombing Power Bomb and speed blocks and the side or bottom of crumble blocks that haven't been stepped on (approximately 40 times),",
+                "grappling grapple blocks, rolling through invisible camera scroll blocks (which often appear in morph tunnels), and touching sand.",
+                "Note that stepping on a crumble block or bombing a bomb block will prevent them from behaving like air after PLMs are overloaded.",
+                "When Samus enters G-mode, this is called direct G-mode if she leaves that room in any way, she is instead in indirect G-mode.",
+                "When in indirect G-mode, blue and green gates do not spawn, and Samus can freely walk through them."
               ],
               "extensionTechs": [
                 {
@@ -2519,7 +2528,9 @@
                   "note": [
                     "Doing something particularly precise, risky, or unintuitive while in G-mode or while setting up G-mode.",
                     "This includes: enemy dodging that would not normally be an issue and is unintuitive, such as enemies that deal a small amount of damage and awkward dodging while artificially morphed;",
-                    "bypassing door locks while in G-mode to maintain indirect G-mode in the next room; exiting G-mode while inside of overloaded blocks in order to X-Ray climb;",
+                    "bypassing door locks while in G-mode to maintain indirect G-mode in the next room;",
+                    "exiting direct G-mode while in the open door to get very deep doorstuck and X-Ray climb and doorlock bypass a door above;",
+                    "exiting G-mode while inside of overloaded blocks in order to have them solidify and be able to X-Ray climb;",
                     "touching an item in direct G-mode before PLMs are overloaded and obtaining the item remotely when exiting G-mode."
                   ],
                   "extensionTechs": [

Original file line number	Diff line number	Diff line change
`@@ -803,6 +803,7 @@`
`803`	`803`	`}`
`804`	`804`	`},`
`805`	`805`	`"requires": [`
	`806`	`+ "canComplexGMode",`
`806`	`807`	`"canXRayClimb"`
`807`	`808`	`],`
`808`	`809`	`"bypassesDoorShell": true,`
Original file line number	Diff line number	Diff line change
`@@ -844,6 +844,7 @@`
`844`	`844`	`}`
`845`	`845`	`},`
`846`	`846`	`"requires": [`
	`847`	`+ "canComplexGMode",`
`847`	`848`	`"canXRayClimb"`
`848`	`849`	`],`
`849`	`850`	`"bypassesDoorShell": true,`
Original file line number	Diff line number	Diff line change
`@@ -277,6 +277,7 @@`
`277`	`277`	`}`
`278`	`278`	`},`
`279`	`279`	`"requires": [`
	`280`	`+ "canComplexGMode",`
`280`	`281`	`"canXRayClimb"`
`281`	`282`	`],`
`282`	`283`	`"bypassesDoorShell": true,`
Original file line number	Diff line number	Diff line change
`@@ -545,6 +545,7 @@`
`545`	`545`	`}`
`546`	`546`	`},`
`547`	`547`	`"requires": [`
	`548`	`+ "canComplexGMode",`
`548`	`549`	`"canLongXRayClimb",`
`549`	`550`	`"canBeVeryPatient"`
`550`	`551`	`],`
Original file line number	Diff line number	Diff line change
`@@ -630,6 +630,7 @@`
`630`	`630`	`}`
`631`	`631`	`},`
`632`	`632`	`"requires": [`
	`633`	`+ "canComplexGMode",`
`633`	`634`	`"canXRayClimb"`
`634`	`635`	`],`
`635`	`636`	`"bypassesDoorShell": true,`
Original file line number	Diff line number	Diff line change
`@@ -178,6 +178,7 @@`
`178`	`178`	`}`
`179`	`179`	`},`
`180`	`180`	`"requires": [`
	`181`	`+ "canComplexGMode",`
`181`	`182`	`"canLongXRayClimb",`
`182`	`183`	`"canBeVeryPatient"`
`183`	`184`	`],`
Original file line number	Diff line number	Diff line change
`@@ -657,6 +657,7 @@`
`657`	`657`	`}`
`658`	`658`	`},`
`659`	`659`	`"requires": [`
	`660`	`+ "canComplexGMode",`
`660`	`661`	`"canXRayClimb"`
`661`	`662`	`],`
`662`	`663`	`"bypassesDoorShell": true,`
Original file line number	Diff line number	Diff line change
`@@ -1276,6 +1276,7 @@`
`1276`	`1276`	`}`
`1277`	`1277`	`},`
`1278`	`1278`	`"requires": [`
	`1279`	`+ "canComplexGMode",`
`1279`	`1280`	`"canLongXRayClimb"`
`1280`	`1281`	`],`
`1281`	`1282`	`"bypassesDoorShell": true,`