Skip to content
Daniel Frenkel edited this page Nov 11, 2026 · 10 revisions

Welcome to the Glasscalibur wiki.

Glasscalibur: an aluminum housing with white end caps, the ram extended from the front end

Glasscalibur is a smart opener for horizontal‑sliding windows, and for single‑ and double‑hung windows with one unit mounted at the center of the sash. It's built on an ESP32‑C6 running ESPHome and a TMC2209 stepper driver. Control it from any web browser (no app, no cloud), pair it natively with Home Assistant, or automate it with built‑in schedules.

Use the links below — or the sidebar on the right — to find what you need.

Build & install

  1. 3D Printing — the parts files and materials
  2. Assembly — put the device together
  3. Window Installation — mount it on your window

Set up & control

  1. Wi‑Fi Setup — get it on your network
  2. Web UI — the browser control panel
  3. Motor & Stall Tuning — calibration, speed, stall detection
  4. Scheduling — fixed times or sunrise/sunset
  5. Security & Tamper — the anti‑tamper alarm

Integrate & maintain

  1. API — HTTP/REST control
  2. Home Assistant — native ESPHome integration
  3. Firmware Updates — over‑the‑air & manual

Throughout these guides, glasscalibur-XXXXXX is your device's unique name — XXXXXX is the last three bytes of its MAC address, printed on the USB serial log at boot and used as both the Wi‑Fi hotspot name and the .local hostname.

Clone this wiki locally