Merge pull request #352 from sweetlilmre/master

Removed deprecated functionality from Print class for BYTE "base"

Author: rogerclarkmelbourne

STM32F1/cores/maple/Print.cpp

@@ -99,10 +99,6 @@ size_t Print::print(unsigned long n, int base) {
 }
 
 size_t Print::print(long long n, int base) {
-    if (base == BYTE) 
-	{
-        return write((uint8)n);
-    }
     if (n < 0) {
         print('-');
         n = -n;
@@ -111,13 +107,7 @@ size_t Print::print(long long n, int base) {
 }
 
 size_t Print::print(unsigned long long n, int base) {
-size_t c=0;
-    if (base == BYTE) {
-        c= write((uint8)n);
-    } else {
-        c= printNumber(n, base);
-    }
-	return c;
+	return printNumber(n, base);
 }
 
 size_t Print::print(double n, int digits) {

STM32F1/cores/maple/Print.h

@@ -28,7 +28,6 @@
 #include "Printable.h"
 
 enum {
-    BYTE = 0,
     BIN  = 2,
     OCT  = 8,
     DEC  = 10,

STM32F1/libraries/A_STM32_Examples/examples/Communication/ASCIITable/ASCIITable.ino

@@ -47,7 +47,7 @@ void loop() {
     // Prints value unaltered, i.e. the raw binary version of the
     // byte. The serial monitor interprets all bytes as
     // ASCII, so 33, the first number,  will show up as '!'
-    Serial.print(thisByte, BYTE);
+    Serial.write(thisByte);
 
     Serial.print(", dec: ");
     // Prints value as string as an ASCII-encoded decimal (base 10).

STM32F1/libraries/A_STM32_Examples/examples/Communication/MIDI/Midi.ino

@@ -44,8 +44,8 @@ void loop() {
 // Plays a MIDI note.  Doesn't check to see that cmd is greater than
 // 127, or that data values are less than 127:
 void noteOn(int cmd, int pitch, int velocity) {
-    Serial1.print(cmd, BYTE);
-    Serial1.print(pitch, BYTE);
-    Serial1.print(velocity, BYTE);
+    Serial1.write(cmd);
+    Serial1.write(pitch);
+    Serial1.write(velocity);
 }
 

STM32F1/libraries/A_STM32_Examples/examples/Communication/SerialCallResponse/SerialCallResponse.ino

@@ -50,15 +50,15 @@ void loop() {
         // read switch, map it to 0 or 255
         thirdSensor = map(digitalRead(2), 0, 1, 0, 255);
         // send sensor values:
-        Serial.print(firstSensor, BYTE);
-        Serial.print(secondSensor, BYTE);
-        Serial.print(thirdSensor, BYTE);
+        Serial.write(firstSensor);
+        Serial.write(secondSensor);
+        Serial.write(thirdSensor);
     }
 }
 
 void establishContact() {
     while (Serial.available() <= 0) {
-        Serial.print('A', BYTE);   // send a capital A
+        Serial.write('A');   // send a capital A
         delay(300);
     }
 }

STM32F1/libraries/A_STM32_Examples/examples/Communication/SerialPassthrough/SerialPassthrough.ino

@@ -26,6 +26,6 @@ void loop() {
     // Read from Serial1, send over USB on Maple (or uses hardware serial 1 and hardware serial 2 on non-maple boards:
     if (Serial1.available()) {
         inByte = Serial1.read();
-        Serial.print(inByte, BYTE);
+        Serial.write(inByte);
     }
 }

STM32F1/libraries/A_STM32_Examples/examples/General/USB_ASCII/USB_ASCII.ino

@@ -67,7 +67,7 @@ void loop() {
     // Prints value unaltered, i.e. the raw binary version of the
     // byte. The serial monitor interprets all bytes as
     // ASCII, so 33, the first number,  will show up as '!'
-    Serial.print(thisByte, BYTE);
+    Serial.write(thisByte);
 
     Serial.print(", dec: ");
     // Prints value as string as an ASCII-encoded decimal (base 10).

STM32F3/cores/maple/wirish/Print.cpp

@@ -88,10 +88,6 @@ void Print::print(unsigned long n, int base) {
 }
 
 void Print::print(long long n, int base) {
-    if (base == BYTE) {
-        write((uint8)n);
-        return;
-    }
     if (n < 0) {
         print('-');
         n = -n;
@@ -100,11 +96,7 @@ void Print::print(long long n, int base) {
 }
 
 void Print::print(unsigned long long n, int base) {
-    if (base == BYTE) {
-        write((uint8)n);
-    } else {
-        printNumber(n, base);
-    }
+    printNumber(n, base);
 }
 
 void Print::print(double n, int digits) {

STM32F3/cores/maple/wirish/Print.h

@@ -26,7 +26,6 @@
 #include <libmaple/libmaple_types.h>
 
 enum {
-    BYTE = 0,
     BIN  = 2,
     OCT  = 8,
     DEC  = 10,

STM32F4/cores/maple/Print.cpp

@@ -99,10 +99,6 @@ size_t Print::print(unsigned long n, int base) {
 }
 
 size_t Print::print(long long n, int base) {
-    if (base == BYTE) 
-	{
-        return write((uint8)n);
-    }
     if (n < 0) {
         print('-');
         n = -n;
@@ -111,13 +107,7 @@ size_t Print::print(long long n, int base) {
 }
 
 size_t Print::print(unsigned long long n, int base) {
-size_t c=0;
-    if (base == BYTE) {
-        c= write((uint8)n);
-    } else {
-        c= printNumber(n, base);
-    }
-	return c;
+	return printNumber(n, base);
 }
 
 size_t Print::print(double n, int digits) {